There is a flashing light with a notation of “Grid Failure”

Check the switchboard and make sure the "Solar Supply Main Switch" is turned ON.

If you have had a power failure this switch may have tripped to off.

Make sure after any blackouts that you make sure its ON.

Related Articles
What happens during a 'Black Out' or Power Outage with a Grid Connect Inverter
Being a 'Grid Connected' inverter - a Blackout will automatically cause the inverter to shutdown. This is to protect the technicians who maybe working on the network/grid/power lines after the blackout. If the inverter continues to show a fault code ...
Fronius Error Message - State 102 - AC Grid Voltage too high - NSW Installation.
Ulongtimelimit increased to 258v.
SP Ausnet Info
Customers > Electricity Customers > Solar Connections SP AusNet supports customers looking to connect a photovoltaic (PV) solar system at their installation within our electricity distribution network (across north and eastern Victoria). SP AusNet is ...
AusGrid Sizing and VRC requirements
For any jobs that are 5kW (inverter and panels) or above they require a VRC. For any jobs that are 4.75kW panels or less no VRC is required. For any jobs that have a 3phase meter box, will require a 3 phase inverter to be installed (or potentially 2 ...

Related Articles